• HDPE Pipe Shredder, Plastic Tube Shredder, Plastic Container Shredder, HDPE Shredder, Shredder Machine

Plastic Tube Container HDPE Pipe Shredder Machine

Plastic Tube Container HDPE Pipe Shredder Machine is used to shred HDPE pipe tube, HDPE Container, UPVC drainage pipe, UPVC water supply pipe, aluminum-plastic composite pipe, polyethylene (PE) water supply pipe, polypropylene PPR hot water pipe, drainage pipe, exhaust and sewage sanitary pipe, underground drainage pipe system, rainwater pipe and wire installation supporting Threading tube, etc.

  • Product Description
  • Technical Parameters
  • Video

Plastic Tube Container HDPE Pipe Shredder Machine Application Areas:

Plastic tube container HDPE pipe shredder machine is used to shred HDPE pipe tube, HDPE Container, UPVC drainage pipe, UPVC water supply pipe, aluminum-plastic composite pipe, polyethylene (PE) water supply pipe, polypropylene PPR hot water pipe, drainage pipe, exhaust and sewage sanitary pipe, underground drainage pipe system, rainwater pipe and wire installation supporting Threading tube, etc.

Description:

Plastic tube container HDPE pipe shredder machine single shaft shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on the single shaft. The fixed cutter is mounted at an angle adjacent to rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

Shredder Blade:

single shaft shredder blade

Working principle:

The motor drives the shaft to make the knife rotate at high speed, the material is put between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.

Components:

single shaft shredder pusher system Heat treated rotor knives
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design Wear Resistant Tungsten surface coating
V-cutting rotor design
with staggered cutter positioning
Wear Resistant
Tungsten surface coating for abrasive applications
Electronic Control Screen
Electronic Control
Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation
Screen Unit
Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control Hydraulic Station
PLC control
Making it easier for fault diagnosis and maintenance
Hydraulic Station
The pressure and rate of flow can be adjusted according to different materials.

Technical Features:

1. The HDPE pipe shredder with the big feeding mouth, can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of a special design, can get very high efficiency and high capacity.
3. The HDPE pipe shredder is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The HDPE pipe shredder runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

 

Quick Links:
HDPE Pipe Recycling Machine

Leave a Reply

Your email address will not be published. Required fields are marked *

single shaft shredder, plastic shredder, plastic pipe shredder, wood shredder, cable shredder

Model PNDS-600A PNDS-800A PNDS-1000A PNDS-1200A PNDS-1500A
Main Powerkw) 15-22 30-45 37-55 55-90 75-132
Hydraulic Power(kw) 2,2 3 4 5.5 5.5
Shredding Diameter(mm) 320 400 400 400 480
Shredding Rotor Length(mm) 600 800 1000 1200 1500
Rotating&Fixing Blades QTY(psc) 32+2×2 38+2×2 58+2×2 95+2×3 110+2×3
End Plastic Scraps Size(mm) 30-50 30-50 30-50 30-50 30-50

Video