• Multifunction Single Shaft Shredder Machine

Multifunction Single Shaft Shredder Machine

Single shaft shredder main used for shred wood pallets, timber, pallets, wood crates, wood boxes, MDF, Chipboard, OSB, Hardwood, Softwood, Veneers (mixed with wood), Cardboards (mixed with wood), Logs, Pallets, Bark, Chipboards, Sawmill waste (wet or dry), Wood residue, Cap timber, Veneer, MDF boards, Bark, Solid Timber Waste and Demolition wood, pine, miscellany wood, Yang wood, fir, original bamboo, waste tray, wood, MDF composite board, etc.

  • Product Description
  • Technical Parameters
  • Video

Single Shaft Shredder Applications:

Plastic: Plastic lump, plastic pipe, plastic sheet, PE film, PP woven bag, PET bottle, raffia, twine
Wood: Wood pallet, wooden box, timber residues
Paper Product: Waste paper and confidential documents
Scrap Metal: circuit board, aluminum casing, copper, radiator, wire, cable, WEEE
Mixed Waste: MSW(municipal solid waste) and RDF (refuse-dervied fuel) production

Pallet Shredder, Tray Shredder, Wood Pallet Shredder, Tray Shredder For Sale

Description:
Single shaft shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. The industrial wood shredder can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

 

Single Shaft Shredder ‘V’ shaped blade:

single shaft shredder blade

 

Single Shaft Shredder Working Principle:

The motor drives the shaft to make the knife rotate at high speed, the material is put between the knife shaft and the fixed knife, the materials are shredded, the qualified size will discharge from the screen mesh, and the oversized material will be sent back for re-shredding. The final product size can be adjusted by changing the final product size.

 

Components:

single shaft shredder pusher system Heat treated rotor knives
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design Wear Resistant Tungsten surface coating
V-cutting rotor design
with staggered cutter positioning
Wear Resistant
Tungsten surface coating for abrasive applications
Electronic Control Screen
Electronic Control
Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation
Screen Unit
Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control Hydraulic Station
PLC control
Making it easier for fault diagnosis and maintenance
Hydraulic Station
The pressure and rate of flow can be adjusted according to different materials.

Technical Features:

1. Rotor knife adopts DC53 steel and counter knife adopts D2 steel(58 HRC), with high hardness and wear-resistance.
2. Mechanical protection and safety, in accordance with European CE standards.
3. Engineered with bearing outcasted, so blades can be changed quickly and efficiently.
4. PLC automatically re-orients rotor direction when motor overload & material jam.
5. Control cabinet adopts trusted brands such as Siemens and Schneider.
6. Easy access to shredder machines rotor and screen, and quick to change them.
7. Rotor knives can be used 2 times before being replaced, reducing operating costs.
8. Extra Pusher Ram is optional for hollow and gigantic materials.
9. Several models of the screen are available and easily interchangeable.
10. The guide rail and pusher can be replaced and are adjustable to maintain a smooth push and retract as well as to keep the crushing chamber fully closed.

Leave a Reply

Your email address will not be published. Required fields are marked *

single shaft shredder, plastic shredder, plastic pipe shredder, wood shredder, cable shredder

Model PNDS-600A PNDS-800A PNDS-1000A PNDS-1200A PNDS-1500A
Dimension L*W*H(mm) 2455×1478×1700 2825×1747×1875 2825×2004×1875 2825×2564×1875 2825×2964×1935
Cutting Chamber C/D(mm) 1200×600 1410×800 1410×1000 1410×1200 1410×1500
Main Powerkw) 15-22 30-45 37-55 55-90 75-132
Hydraulic Power(kw) 2,2 3 4 5.5 5.5
Shredding Diameter(mm) 320 400 400 400 480
Shredding Rotor Length(mm) 600 800 1000 1200 1500
Rotating&Fixing Blades QTY(psc) 32+2×2 38+2×2 58+2×2 95+2×3 110+2×3
End Plastic Scraps Size(mm) 30-50 30-50 30-50 30-50 30-50

Video