Waste Pallet Hammer Crusher Wood Crusher Machine Application areas:

Industrial waste wood crusher machine is widely used in biomass fuel, pharmaceutical, chemical, scientific research, feed, organic fertilizer, breeding and other industries.

Waste Pallet Hammer Crusher Wood Crusher Machine Applicable materials:

Industrial waste wood crusher machines can crush various biological straws, pallets, sawdust, wood, branches and other agricultural waste.

Waste Pallet Hammer Crusher Wood Crusher Machine Working principle:

The material enters from the feed port of the waste wood crusher machine, and after violent collision with the high-speed hammer, it is hammered and pulled into the acceleration zone, where the particle speed can be increased to close to the end line of the hammer in a short period of time. At full speed, the hammer moves in a circular motion, and a material flow layer is gradually formed at full speed. At the same time, the material is further crushed, and the crushed material is discharged from the discharge of the equipment.

Waste Pallet Hammer Crusher Wood Crusher Machine Detail:

The corners of the wood crushers are welded with high-hardness material like carbon tungsten alloy, the welding layer thickness is 8mm, which can increase the user’s lifetime.	The bottom diameter of the screen is 6mm-12mm, thickness is greater than 4mm. It can be customized according to the customer’s requirements.
The motor and the crushers are directly connected by the coupling, can save more electricity and more efficiency	There is no dead angle during the crushing so the finished product is very fine.

Waste Pallet Hammer Crusher Wood Crusher Machine Advantages:

1. 1. Crushing method: double-shaft series, with large crushing output and high efficiency; reasonable design and structure, simple use and convenient maintenance.
   2. High-quality finished product: Hammer mill is used to crush dry and oil-free feed, and can obtain finer finished products.
   3. Durable: In order to further extend the life of the equipment, the corners of the hammer are overlayed with high-hard materials such as tungsten carbide alloy, and the welding layer is 1-3mm thick. Its service life is longer than that of the 65Min integrally quenched hammer 7-8 times.
   4. No pollution and high efficiency. The hammer mill adopts an internal cooling structure, which can avoid damage to the machine due to high temperatures caused by friction and extend the life of the equipment. At the same time, the equipment is equipped with a dust collection device to prevent powder pollution. The overall equipment has the characteristics of low temperature, low noise and high efficiency.

Required Equipment: