Scrap Wire Copper Cable Shredder Application Areas:
Scrap Wire Copper Cable Shredder Recycling Machine is used to recycle harness wire, communication wire, installation wire, power cables with copper or aluminum conductors, copper wire, ACSR-wire, mixed household wire, waste communication wire, wire and cable, automobile wire, computer wire, telephone wire, USB data wire, household appliance wire, and other wires. The final size after shredding is 10-30mm.

Why recycle copper cables?
Approximately 60 to 80% of the weight of cables comes from the metal contained inside them. The main driving force to recycle cable waste is to recover the valuable metal portion. Copper is also a non-renewable metal whose exploitation incurs serious environmental effects. Such metal after recycling doesn’t degrade, thus it can be recycled indefinitely. Every day a great amount of broken, unused and aged cables are discarded worldwide, taking up a large portion of e-waste. Accumulation of abandoned cable posts potential fire hazard which can bring harmful effects on nature and human beings. It makes great sense to recycle waste copper cables.
Description:
Scrap Wire Copper Cable Shredder Recycling Machine uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small sizes. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reducing of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.
Single Shaft Shredder ‘V’ shaped blade:

Working Principle:
The motor drives the shaft to make the knife rotates at high speed, the material is put between the knife shaft and fixed knife, the materials are shredder, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re-shredding. The final product size can be adjusted by changing the final product size.
Components:
 |
 |
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components. |
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement |
 |
 |
V-cutting rotor design
with staggered cutter positioning |
Wear Resistant
Tungsten surface coating for abrasive applications |
 |
 |
Electronic Control
Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation |
Screen Unit
Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance. |
 |
 |
PLC control
Making it easier for fault diagnosis and maintenance |
Hydraulic Station
The pressure and rate of flow can be adjusted according to different materials. |
Technical Features:
1. The cable shredder with a big feeding mouth, can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of special design, can get very high efficiency and high capacity.
3. The cable shredder is controlled by a PLC system; the blade can rotate in opposite directions and close automatically if something unexpected happens; with very high safety service.
4. The cable shredder runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All machinery and electrical devices are protected in accordance with the European CE standard.
Related equipment:
Leave a Reply