• Wheat Rice Straw Corn Stalk Biomass Shredder Crusher Machine

Wheat Rice Straw Corn Stalk Biomass Shredder Crusher Machine

Straw stalk biomass shredder work, driven by the motor reducer, gear reducer drive stick, grasp the machine will put into the hopper, material materials uniform land on the rotor, two-rotor to shear to realize the material of the preliminary broken, after preliminary broken material without under its own gravity and rotor spinning is off on the conveyor under the crushing cavity, then through the conveyor to the site of the aggregate.

  • Product Description
  • Technical Parameters
  • Video

Biomass Shredder Description:
With the continuous improvement of living standards, people pay more and more attention to the environment. Especially for biomass straw, corn stalks, wheat stalks, cotton stalks, peanut seedlings, soybean stalks, waste wood and other such combustible recycling, if you have a lot of relevant resources, you can consider investing in biomass shredder it will create huge wealth for you. These materials can be used as combustion materials in biomass power plants after being processed and broken by biomass shredder. This development enables the recycling of waste. The biomass shredder is mainly designed with a double motor and reducer, which drives the double shaft of the crushing chamber to crush the materials by means of stick moving, shattering and extrusion. The crushed materials are transported to the aggregate site underground. The whole biomass shredder process is environmentally protection and energy-saving, which is one of the modern shredding equipment of straw.

Straw Shredder, Biomass Shredder, Biomass Crusher, Rice Straw Shredder, Corn Stalk Shredder

Biomass Shredder Working Principle:
Straw stalk biomass shredder work, driven by the motor reducer, gear reducer drive stick, grasp the machine will put into the hopper, material materials uniform land on the rotor, two-rotor to shear to realize the material of the preliminary broken, after preliminary broken material without under its own gravity and rotor spinning is off on the conveyor under the crushing cavity, then through the conveyor to the site of the aggregate.

Biomass Shredder Components:

double shaft shredder chassis Shredder spindle
Shredder Chassis
The whole chassis is made of welded steel plate and finely machined by CNC gantry milling, which has high bearing capacity, high impact resistance and more stable quality.
Shredder Spindle
The shredder spindle is made of high alloy, forged and heat-treated and tempered as a whole, and then machined into hexagonal, octagonal and spline form by CNC gantry milling after fine turning, with long service life.
double shaft shredder blade Segmented Blades
Shredder Blade
The shredder blade is made of special steel, forged, faded, refined, vacuum heat treatment, computerized wire cutting, CNC grinding machine processing.
Segmented Blades
The segmented blade design can greatly reduce the blade changing time and cost. The blade comprises of the blade holder, and two types of blade segments, with and without hooks. Worn blade segments can quickly and easily be removed and replaced by simply removing the securing screws.
motor Planetary reducer
Motor
The motor adopts Siemens, Wanan and other domestic brands of pure copper motor, with stable and reliable quality, and can be customized according to requirements.
Planetary Reducer
The reducer chassis adopts welded box, helical gear, planetary gear transmission, with small volume, low noise, high torque and other characteristics, higher transmission efficiency.
conveyor belt double shaft shredder electronic control
Belt Conveyor(Optional)
The waste is conveyed into the shredder through the belt feeding device, and the speed of the conveyor belt is automatically adjusted according to the current of the shredder.
Electronic Control
The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.

Biomass Shredder Features:
1. Low rotation speed, large torque and no dust pollution.
2. The cutting tool is made of alloy material, wear-resistant and durable.
3. There is a variety of tool configurations, for customers to choose from.
4. The control system is controlled by PLC, with functions of start, stop, reverse and overload automatic reverse control.

Leave a Reply

Your email address will not be published. Required fields are marked *

Model Shredder Motor Power Shredding Chamber Size
PNSS-300 5.5 510×300
PNSS-400 7.5 510×400
PNSS-600 7.5+7.5 510×600
PNSS-800 11+11 600×800
PNSS-1000 18.5+18.5 800×1000
PNSS-1200 30+30/22+22 1000×1200
PNSS-1400 45+45 1400×1200
PNSS-1600 55+55 1600×1200
PNSS-1800 75+75 1800×1400
PNSS-2000 90+90 2000×1400

Video

Recent Products